Wildland

 

Wildland

 
HawkExtreme-1HawkExtreme2HawkExtreme3Hawk62_USForestry2---EXTERIOR-Hewlett-Fire-webWildland-Exterior-10Wildland-Exterior-11Wildland-Exterior-22
 
Overview
Hawk Extreme™
Type 1
Type 3
Type 4
Foam

Wildland trucks with experienced engineering.

Hawk Extreme™

Built to deliver the ultimate combination of off-road mobility and firefighting performance, the Pierce® Hawk Extreme™ wildland tanker provides reliable response in extreme environments. With its 2,500 gallon water tank, full-time/all-wheel drive and legendary TAK-4® independent suspension, Hawk Extreme gets water where it needs to be. And with the option of including Husky3 and HerculesCAFS, you have the flexibility to tackle any threat the wild throws at you. 

Hawk Extreme Brochure >>
 

Watch the Hawk Extreme Video >>

Wildland Type 1 Vehicles

Pierce® Wildland Type 1 is short on wheelbase and overall length, yet big on ground clearance – maximizing mobility over stretches of unforgiving urban wildland. These vehicles offer over 200 cubic feet of compartmentation along with a 1500 gpm single stage pump and pump and roll capabilities, so you can respond to any challenge.

Wildland Type 1 Brochure >>

Wildland Type 3 Vehicles

Designed to answer the urgent call in a more complex scene, Pierce Wildland Type 3 Vehicles are equipped to flow up to 1000 gpm, along with the capacity to carry a 5-person crew. These vehicles also boast all-wheel drive and a shorter wheelbase to promote maneuverability offroad and on challenging narrow roadways.

Wildland Type 3 Brochure >>

Wildland Type 4 Vehicles

Pierce Wildland Type 4 is built with extensive tank capacities to arm you for bigger threats across stretches of harsh wildland. These vehicles are designed to carry 750-850 gallons of water to scenes with a dry, hot climate and minimal vegetation.

Wildland Type 4 Brochure >>

 

 

CHASSIS FEATURES

  • Chassis: Pierce® Hawk™ EX
  • Full-Time, All Wheel Drive
  • Transfer Case: Oshkosh® Model 3000
  • Axles: 6X6, three axles; inter-axle differential lock
  • Engine: Cummins ISL 450
  • Transmission: Allison Gen IV EVS 4500, 6 speeds
  • GVWR: Front axle – 18,000 lbs. (8,165 kg)
  • Intermediate axle – 21,000 lbs. (9,525 kg)
  • Rear axle – 21,000 lbs. (9,525 kg)
  • Oshkosh TAK-4® independent front and rear suspension
  • Anti-lock brakes with Automatic Traction Control (ATC)
  • Welded aluminum extrusion construction
  • Three-person cab width 82.3 in. (2090 mm)
  • Modular dash panels for easy service
  • Multiplex gauge control

PERFORMANCE

  • Gradeability: 60% @ maximum GVW
  • Side Slope: 30%
  • Maximum Speed (GCW Road): 65 mph (105 kph)
  • Cruising Range: 336 miles (540.7 km)
  • Fording Capability: 48 in. (1524 mm)
 

FIRE PROTECTION & WATER TANK PACKAGE

  • Darley HH-500, 500 gpm (1900 lpm), single stage pump
  • Pierce pressure governor operated variable displacement hydraulic drive
  • Stainless steel plumbing
  • Electric rewind booster with 200 ft. (60.8 m)1 in. (25.4 mm) hose in a well on upper rear portion of water tank
  • Front Bumper Turret Discharge: Constant Flow 95 gpm (361 lpm) nozzle; 180° rotation, 90° above and 60° below horizontal
  • Ground Sweep Nozzles: Two 0.5 in. (12.7 mm) ground sweep nozzles; One at each outside corner of vehicle below bumper
  • Water Tank: 2,500 gallon (9,500 liter) capacity, “wet side”;
  • High-impact polypropylene tank material
  • Polypropylene storage compartments integral with water tanks
  • Torque box-style construction with spring mounted to chassis frame rails; Full support of water tank floor area; Storage for folding tank or long equipment integrated into torque box

HIGHLIGHTS

• Variants: Hawk 162
• Configurations: Pierce® custom chassis 4 x 2
• and 4 x 4 with seating up to 6
• Tank Capacity: 500 gallons (water tank), 30 gallons (foam tank)
• Pump: PUC 1500 gpm; pump and roll standard with
• no additional auxiliary pump needed
• Wheelbase: Minimum 162 inches

MORE FEATURES

• Cummins 450 hp with 1250 ft. lbs. torque
• Single touch water-foam-CAFS selection from dash
• Enclosed Control Zone™ pump panel
• Operator panel adjacent (not over) hose connections
• Stainless steel plumbing
• Chest height crosslays
• Chest height ladder storage
• Ladder access to hosebed
• 3/8 in. steel lateral frame extensions
• TAK-4® independent front suspension
• Side Roll Protection
• Frontal crash airbags

 

CHASSIS

• Available On: All Pierce® custom chassis
• Configurations: 4 x 2 and 4 x 4
• Wheelbase: Minimum 162 in.

BODY

• Material: Aluminum PUC™
• Compartment Weight: 800 lbs.
• Compartment Interior: multispec paint with sweep out design
• Compartment Space: 209.75 cu. ft.

PUMP AND FOAM FEATURES

• Pump: PUC 1500 gpm single stage
• Pump And Roll: Standard with no additional auxiliary pump needed
• Panels: Stainless steel, 4 sections for easy access
• Foam System: Husky™ 3, Husky™ 12, Hercules™ 140, Hercules™ 200
• Tank: 500 gal. (water tank), 30 gal. (foam tank) with lifetime warranty

ELECTRICAL

• System: Multiplex or hard wired
• Harnesses: Loom protected, coded by color and function every 3 in.
• Connectors: Deutsch connectors for corrosion prevention


HIGHLIGHTS

• Variants: Hawk 65
• Configurations: International Workstar 4 door 4x4
• Tank Capacity: 500 gallons
• Pump: PTO driven 500 - 1000 gpm; available with added auxiliary engine drive pump
• Wheelbase: 179 & 185 inches

MORE FEATURES

• Aluminum extruded rub rails, bolted on for easy repair
• Formed and welded body offers long-lasting design without added weight
• Exclusive Pierce® underslung steel body supports with three-point isolated mount system reduce torsional stress and prevent road shock from being transmitted into the body; the underslung design also eliminates compartment floor sag
• Hatch compartmentation
• Hose reel(s) available above pump compartment
• Piano-hinged body doors constructed of double pan aluminum, enclosed latches and .25 in. hinge pins
• Equipment storage in the hosebed
• Easily replaceable diamond plate overlays in potential high scuff areas
• Pierce exclusive handrails with “cross knurled” design to reduce slippage
• Running boards and tailboard are spaced from body to improve water run-off

 

CHASSIS

• Configurations: International Workstar 4 door 4 x 4
• Wheelbase: 179 in. & 185 in. dependent upon pump size

BODY

• Material: Galvanneal standard with optional stainless steel
• Compartment Weight: 400 lbs.
• Compartment Depth: 12 in. upper, 24 in. lower (door closed)
• Compartment Interior: Multispec paint with sweep out design

PUMP AND FOAM FEATURES

• PTO Pump: Darley JMP 500 gpm, Darley LSP 750 - 1000 gpm
• Aux Pump: Darley 1.5 AGE 180 gpm
• Foam System: Husky 3, FoamPro 1600, FoamPro 2001 (Up to 30 gal. foam cell)
• Optional Systems: Pierce HerculesTM Compressed Air Foam Systems, 125 cfm
• Pump Panels: Black vinyl-covered, glare-reducing panels; removable body panels access pump for easier maintenance
• Tank: 500 gal. polypropylene tank with lifetime warranty

ELECTRICAL

• Systems: International Diamond Logic Multiplex
• Harnesses: Loom protected; coded by color and function every 3 in.
• Connectors: Deutsch connectors for corrosion prevention


HIGHLIGHTS

• Variants: Hawk 67
• Configurations: International Workstar and Freightliner M2 2 door and extended cabs 4 x 2 and 4 x 4 with seating up to 5
• Tank Capacity: 750 gallons (front body pump), 850 gallons (rear body pump)
• Pump: Auxiliary engine driven 150-250 gpm, optional high pressure auxiliary engine driven pump
• Wheelbase: 158-193 inches

MORE FEATURES

• Stainless tubular rub rails, bolted on for easy repair
• Stainless steel formed single-piece side sheets are welded to Huck bolted and bonded compartments for long-lasting design without added weight
• Exclusive integral body supports with spring isolated mount system reduce torsional stress and prevent road shock from being transmitted into the body
• Poly compartmentation on top of body
• 2 hose reels on top-front of body with in-cab rewind switches
• Piano-hinged body doors constructed of welded double pan stainless steel, enclosed latches and .25 in. hinge pins
• Flush doors with polished stainless edge trim and door-opening scuff plates
• Easily replaceable diamond plate overlays in potential high scuff areas
• Pierce® exclusive handrails with “cross knurled” design to reduce slippage
• Front and rear steel bumpers
• Rear body and front body pump locations
• Integrated spare tire carrier with lifting winch

 

CHASSIS

• Available On: International Workstar and Freightliner M2
• Configurations: 2 door and extended cabs; 4 x 2 and 4 x 4
• Wheelbase: 158 in. -193 in. dependent on chassis

BODY

• Material: Stainless steel
• Compartment Weight: 400 lbs.
• Compartment Interior: Unpainted with sweep out design; optional multispec paint

PUMP AND FOAM FEATURES

• Pump: Darley 1.5AGE (125 gpm), 1.5AGE-HP (400 psi), 2.5AGE (250 gpm @ 100 psi), HSE250 (150 gpm @ 250 psi)
• Panels: Stainless steel body, removable hinged body panels access pump for easier maintenance
• Foam System: HuskyTM 3, FoamPro 1600, Waterous Aquis 1.5 (Up to 20 gal. foam cell)
• Tank: 750 gal. (front body pump), 850 gal. (rear body pump) polypropylene tank with lifetime warranty

ELECTRICAL

• System: Class One EsKey multiplex
• Harnesses: Loom protected, coded by color and function every 3 in.
• Connectors: Deutsch connectors for corrosion prevention


Exclusive Pierce® Foam Systems

Pierce engineers and manufactures its own integrated foam systems capable of fighting with both Class A and Class B foam. Pierce® Foam Systems are the high performing, easy-to-use, economical and safe way to fight fires.

Husky™ 3

Meet the only foam system of its kind. The inspiration behind Husky™ 3 was: best-in-class everything. The best-performing, most versatile value foam system in its class.

Husky™ 12

One-button operation, fully automatic, true Class A and B foam system, the Husky™ 12 is full force, Pierce fire suppression.

Hercules™ CAFS

The Hercules™ Compressed Air Foam System controls fires faster, reduces water use, and lightens handlines with better exposure protection. It will work well with Class A or Class B agents.