Husky™ 3

 

Husky™ 3

 
 
Overview
Features
Specs

Husky Performance

Husky™ 3

Boasting many of the same unmatched standards of the Husky™ 12 foam system, Husky™ 3 is the only entry-level foam system available with Class A and Class B capabilities.

See a full list of Husky™ Foam Systems >>

 

 Husky 3 Sell Sheet >>

Pierce Foam System Brochure >> 

Features you care about.

  • Husky™ is designed for Class A and B foams including high-viscosity, polar solvent class B foams (up to 6000 centipoise). 
  • Electronic digital foam proportioning system improves responsiveness, reliability, and accuracy through a range of 50 psi to 150 psi.
  • On-demand design ensures no foam is bypassed back to the foam tank or recirculated through the foam pump.
  • Foam systems are capable of using the vehicle's water tank, high-pressure hydrant or draft as a water source. 
  • Foam systems can draft foam concentrate from an outside source, allowing extended foam operation.
  • The system shall properly proportion as low as 35 GPM at .3% for mop-up applications. 
  • Warranty: Five years on the electronic controller and display head.
  • Operating pressures up to 400 psi.
  • Easy to use push-button control.

KEY SPECS

  • Entry-level: Single Tank Class A with refill as Standard
  • Designed for Structure Fires, Wildland Fires, Automobile and Small Class B Spills
  • Capable of Pumping Class A or Class B Foam
  • 3 GPM of Foam Concentrate @ 150 PSI Rated Capacity
  • Operating Pressures up to 400 PSI
  • Injection Percentages from .1 - 3%
  • Electronic Direct Injection Foam System
  • Easy-To-Use Push-Button Control
  • DC Hydraulic Power Unit
  • Auxiliary Foam Pick-Up
  • The only system on the market to fill the foam tank from the ground as standard

CAPACITY 

  • 3% 100 GPM
  • 1% 300 GPM (the maximum flow will depend on plumbing restrictions)
  • 0.5% 600 GPM (the maximum flow will depend on plumbing restrictions)
  • 0.2% 1000 GPM (the maximum flow will depend on plumbing restrictions)

SAFETY

  • Pierce® foam systems are much lighter than the heaviness of water weight in the hose and are easier to control and more effective, which means less injuries and health-related issues.
  • Experience quicker knockdown, resulting in less time spent at the fire and less fatigue.
  • Reduced water damage to the structure because only half the water is needed to extinguish the fire.

SAMPLE OPTIONS

  • Foam tank fill using the proportioner and foam pick-up tube to eliminate the need to drag foam pails to the top of the fire apparatus.
  • Integration with Pierce Hercules™ Compressed-air foam system.