skip to main content

Press Releases

Pierce-Arrow-XT-Equipped-with-Innovative-and-Versatile-Snozzle-Aerial-Device-on-Duty-in-Elizabeth,-N.J._Header.jpg

APPLETON, Wis. (November 3, 2014) –
Pierce Manufacturing, an Oshkosh Corporation (NYSE:OSK) company, placed a Pierce® Arrow XT™ custom firefighting apparatus, equipped with a Snozzle® High Reach Extendable Turret (HRET) featuring a piercing nozzle, at the Elizabeth Fire Department located in Elizabeth, N. J. The vehicle, expected to respond to over 1,000 calls per year, will also operate as a specialized foam pumper. It joins three other Pierce Arrow XT vehicles purchased by the department within the past year.

“The tough and reliable Pierce Arrow XT, matched with the innovative Snozzle HRET, is a powerful combination for a wide range of emergency responses,” said Jim Johnson, Oshkosh Corporation executive vice president and president, Fire & Emergency. “The fast set-up time and penetrating nozzle technology allow firefighters to quickly discharge more extinguishing agent directly where it is needed – while keeping them farther out of harm’s way.”

Elizabeth FD also purchased a Ford F-450 utility vehicle that carries a 1,000-pound dry chemical system to supply dry chemical powder to the Snozzle apparatus. Additionally, in the past year, the department purchased three Pierce Arrow XT vehicles including a stock pumper, a 2,000-gpm pumper, and a 100-foot aerial ladder.

In addition to industrial, commercial, and residential areas, the Elizabeth Fire Department’s protection district includes portions of Newark International Airport as well as a major portion of the largest container seaport on the East Coast. The Snozzle is a versatile device that operates above or below grade, and can pierce a shipping container. When operating as a foam pumper, the apparatus will enhance the fire department’s foam-making capabilities. 

Built on the Arrow XT chassis with dual rear axles, the Snozzle-equipped vehicle sports a 500-hp engine, five-speed pushbutton transmission, and a Command Zone™ advance electronics system. The 10-inch raised roof cab provides seating for six firefighters, includes a pair of forward facing EMS cabinets, and is equipped with Pierce’s front impact and side roll protection systems. The vehicle also features a 750-gallon water tank, dual deck guns, a 2,000-gpm pump, a Husky® 60 foam system, a Hydrochem nozzle, and a 300-gallon foam cell.

The Pierce-exclusive Snozzle HRET, with a hardened carbide steel tip and a perforated nozzle, enables firefighters to penetrate virtually any material in a building, cargo container, or other structure. Its ability to discharge from 20 feet below grade to elevations as high as 65 feet gives the apparatus maximum versatility.
  
Established 350 years ago, the City of Elizabeth is New Jersey’s birthplace and, today, is a hub for transportation, shipping, and industrial and retail businesses. The first fire company in Elizabeth (Protection Engine Co. 1) was established in 1789. Today, the Elizabeth Fire Department is comprised of 269 firefighters and more than 50 EMS personnel.

Pierce dealer, Fire & Safety Services of South Plainview, N.J., provides local service and support through its full service facilities and seven trained mechanics.
View All Press Releases

Subscribe & Keep Up To Date

Yes, I want to become a Pierce guru!


Topics: Innovation, Apparatus Orders


About Pierce Manufacturing
Pierce Manufacturing Inc., an Oshkosh Corporation [NYSE: OSK] business, is the leading North American manufacturer of custom fire apparatus. Products include custom and commercial pumpers, aerials, rescue trucks, wildland trucks, mini pumpers, and homeland security apparatus. In addition, Pierce designs its own foam systems and was the first company to introduce frontal airbags and the Side Roll Protection system to fire apparatus. To learn more about Pierce, visit www.piercemfg.com.

About Oshkosh Corporation

At Oshkosh (NYSE: OSK), we make innovative, mission-critical equipment to help everyday heroes advance communities around the world. Headquartered in Wisconsin, Oshkosh Corporation employs approximately 17,000 team members worldwide, all united behind a common purpose: to make a difference in people’s lives. Oshkosh products can be found in more than 150 countries under the brands of JLG®, Hinowa, Power Towers, Pierce®, MAXIMETAL, Oshkosh® Defense, McNeilus®, IMT®, Jerr-Dan®, Frontline™ Communications, Oshkosh® Airport Products, Oshkosh AeroTech™ and Pratt Miller. For more information, visit oshkoshcorp.com.

®, ™ All brand names referred to in this news release are trademarks of Oshkosh Corporation or its subsidiary companies.

Forward Looking Statements

This news release contains statements that the Company believes to be “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. All statements other than statements of historical fact, including, without limitation, statements regarding the Company’s future financial position, business strategy, targets, projected sales, costs, earnings, capital expenditures, debt levels and cash flows, and plans and objectives of management for future operations, are forward-looking statements. When used in this news release, words such as “may,” “will,” “expect,” “intend,” “estimate,” “anticipate,” “believe,” “should,” “project” or “plan” or the negative thereof or variations thereon or similar terminology are generally intended to identify forward-looking statements. These forward-looking statements are not guarantees of future performance and are subject to risks, uncertainties, assumptions and other factors, some of which are beyond the Company’s control, which could cause actual results to differ materially from those expressed or implied by such forward-looking statements. These factors include the Company's ability to successfully integrate the AeroTech acquisition and to realize the anticipated benefits associated with the same; the risks associated with international operations and sales, including compliance with the Foreign Corrupt Practices Act;  the Company’s ability to comply with complex laws and regulations applicable to U.S. government contractors; cybersecurity risks and costs of defending against, mitigating and responding to data security threats and breaches impacting the Company; the Company’s ability to successfully identify, complete and integrate other acquisitions and to realize the anticipated benefits associated with the same; and risks related to the Company’s ability to successfully execute on its strategic road map and meet its long-term financial goals. Additional information concerning these and other factors is contained in the Company’s filings with the Securities and Exchange Commission. All forward-looking statements speak only as of the date of this news release. The Company assumes no obligation, and disclaims any obligation, to update information contained in this news release. Investors should be aware that the Company may not update such information until the Company’s next quarterly earnings conference call, if at all.

# # #